EAS-NC

Backlash-free Safety Clutch

  • Indicating torque adjustment

  • Easy assembly

  • Hardened functional components

  • Synchronous and Ratchetting design
     
EAS-NC standard
Type 450.___.0 | Limiting torque 0.65 - 450 [Nm]

 		 Flanged torque limiting clutch backlash-free torque
transmission between shaft and drive element.
The torque is transmitted backlash-free until disengagement
and reduces immediately when an overload occurs.
Low mass moment of inertia.
Automatic re-engagement.
Long working life.
 
EAS-NC long projecting hub
Type 450.___.1 | Limiting torque 0.65 - 450 [Nm]

 		 Flanged torque clutch for backlash-free torque
transmission between shaft and drive element.
The torque is transmitted backlash-free until disengagement
and reduces immediately when an overload occurs.
Additional location of wide drive elements on a long hub
through roll and slide bearing is possible.
Low mass moment of inertia.
Automatic re-engagement.
Long working life.
 
EAS-NC two-bearings design
Type 450.___.2 | Limiting torque 0.65 - 450 [Nm]

 		 Flanged torque limiting clutch for backlash-free torque
transmission between shaft and drive element.
The torque is transmitted backlash-free until disengagement
and reduces immediately when an overload occurs.
EAS-NC two-bearings version for direct stable location of
the drive elements on the clutch,
Low mass moment of inertia.
Automatic re-engagement.
Long working life.
 
EAS-NC with steel bellows coupling
Type 453.___.0 | Limiting torque 0.65 - 450 [Nm]

 		 Torque limiting clutch for backlash-free torque
transmission between two coaxial shafts.
The torque is transmitted backlash-free until disengagement
and reduces immediately when an overload occurs.
Low mass moment of inertia.
Automatic re-engagement.
Compensates axial, radial and angular misalignments.
Long working life.
 
EAS-NC lastic backlash-free
Type 454.___._ | Limiting torque 4 - 450 [Nm]

 		 Torque limiting clutch for flexible, backlash-free torque
transmission between two coaxial shafts.
The torque is transmitted backlash-free until disengagement
and reduces immediately when an overload occurs.
Automatic re-engagement.
Compensates axial, radial and angular misalignments.
High degree of damping characteristic - Long service life.
 
EAS-NC standard with
fitting dimensions of the type series 400
Type 451.___.0 | Limiting torque 4 - 2400 [Nm]

 		 Flanged torque limiting clutch for backlash-free torque
transmission between shaft and drive element.
The torque is transmitted backlash-free until disengagement
and reduces immediately when an overload occurs.
Low mass moment of inertia.
Automatic re-engagement.
Long working life.
 
EAS-NC with long projecting hub and
fitting dimensions of the type series 400
Type 451.___.1 | Limiting torque 4 - 2400 [Nm]

 		 Additional location of wide drive elements on a long hub
through roll and slide bearing is possible.
Low mass moment of inertia.
Automatic re-engagement.
Long working life.
 
EAS-NC with short supported hub and
fitting dimensions of the type series 400
Type 451.___.5 | Limiting torque 4 - 450 [Nm]

 		 Simple symmetrical and narrow drive elements can be
fitted without additional support bearing due to the
integrated bearing.
Low mass moment of inertia.
Automatic re-engagement.
Long working life.
 
EAS-NC torsionally rigid
Type 456.___.8 | Limiting torque 75 - 2400 [Nm]

 		 Torque limiting clutch for backlash-free torque
transmission between two coaxial shafts.
The torque is transmitted backlash-free until disengagement
and reduces immediately when an overload occurs.
High torsional stiffness.
Long working life.
 
EAS-NC lastic
Type 457._3_.0 | Limiting torque 4 - 450 [Nm]

 		 Backlash-free torque limiting clutch combined with a
torsionally flexible shaft coupling for connection two shafts.
The flexible coupling section is designed as a simple
slip-on coupling which allows an easy assembly and
dismantling of the clutch.
Long working life.